Maintenance Engineer (Ammonia Refrigeration System)
Ice-Man Sdn Bhd Johor Bahru Full-time
About the role
We are looking for a Maintenance Engineer to take technical ownership of our ammonia (R717) refrigeration system and support the reliability of our ice manufacturing plant. You will oversee preventive maintenance, troubleshoot breakdowns, guide technicians and coordinate specialist contractors across refrigeration, ice making, packaging and utility equipment.This is a practical engineering role for someone who takes ownership, works systematically and is committed to safety, reliability and continuous improvement.
Key Responsibilities- Ammonia Refrigeration (Primary)
- Operate and maintain the ammonia plant: compressors, oil management, evaporative condensers, vessels, recirculation pumps, evaporators, ice generators, valve stations, purgers and hot-gas defrost.
- Keep daily operating logs and act on pressures, oil return, superheat, liquid levels, non-condensables and abnormal noise or vibration.
- Carry out pump down, isolation, purging, oil draining and charging strictly to written procedure never improvised.
- Maintain system integrity: leak detection and repair, valve and gasket condition, insulation and corrosion under insulation.
- Maintain and prove test gas detection, alarms, emergency ventilation, water spray, emergency stops and relief protection.
- Keep the charge inventory, P&IDs, vessel and relief-valve records current, and coordinate statutory pressure-vessel inspections.
- Lead ammonia emergency preparedness procedures, PPE and breathing apparatus, drills, incident reporting and train technicians and operators.
- Plant Maintenance and Reliability
- Maintain production and utility equipment: conveyors, packaging and sealing machines, weighing systems, water treatment and filtration, cooling towers, air compressors and cold rooms.
- Maintain the instrumentation and controls the plant depends on sensors and transmitters, level, pressure and temperature controls, VFDs, control panels, interlocks and safety trips and keep them calibrated, functional and proven on test.
- Use condition monitoring and maintenance data vibration, temperature, motor current, run hours, pressure and consumption trends to predict failures and prioritise work before breakdown.
- Keep maintenance records, equipment history and spares data in a usable digital system, and use them to drive decisions rather than relying on memory.
- Respond to breakdowns: safe isolation, repair, test and prompt return to service. Investigate recurring failures and fix the root cause.
- Run preventive and condition based maintenance: schedules, checklists, equipment history, downtime tracking and a critical spares register with minimum stock levels.
- Escalate work beyond your certification or the team's competence statutory pressure system repairs, high voltage work, PLC programming to qualified contractors.
- Team, Contractors and Production
- Plan and assign daily work to technicians, coach on workmanship, and verify jobs are safely tested before release to production.
- Prepare technical scopes, review quotations, control permits to work and confirm contractor work solved the original problem.
- Give production clear equipment status and repair timelines, plan shutdown windows, and flag when an operating request creates unacceptable equipment, quality or safety risk.
- Energy, Water and Improvement
- Track energy and water use against output (kWh and cubic metres per tonne) and drive both down.
- Optimise refrigeration efficiency: suction and condensing pressure, condenser cleanliness and approach, cooling tower performance, defrost cycles, compressor sequencing and part-load operation.
- Manage the water balance filtration and RO recovery, tower make-up and blowdown, washdown and leak detection reusing water only where food-safety rules allow.
- Propose improvements with a simple payback case, implement them safely, and verify the savings afterwards.
- Support equipment-performance monitoring and use maintenance data to prioritise reliability improvements.
- Food Safety and Hygiene
- Maintain product-zone equipment to food grade standards: hygienic condition, intact seals, no rust, flaking paint or condensate drip onto product.
- Use only food-grade lubricants and approved chemicals in product zones, with records available.
- Maintain potable water treatment, filtration and disinfection so maintenance work never compromises water quality.
- Control the risks maintenance creates: glass and brittle plastic policy, tool and parts accountability, debris control, and clean-down before release to production.
- Support food-safety audits with maintenance, calibration and corrective-action records.
- Diploma or Degree in Mechanical, Electrical, Mechatronics, Refrigeration or Automation Engineering, or a related discipline.
- At least 4 years of hands-on maintenance experience in manufacturing, food processing, cold-chain or a process plant.
- Hands-on ammonia (R717) refrigeration experience is required compressor operation, oil management, safe isolation and pump-down, leak response and emergency procedures. State plant capacity, compressor makes and system type.
- Must hold, or be able to obtain, the statutory competency certification required for the plant (pressure-system competency and electrical chargeman as applicable). State the certificates you hold, with grade and expiry.
- Familiar with recognised ammonia safety practice (IIAR, ASHRAE 15 or national equivalent) and statutory pressure-vessel inspection requirements.
- Comfortable with plant instrumentation and controls sensors, transmitters, VFDs, control panels, interlocks and safety trips including fault-finding, calibration and functional testing. Deep PLC programming is not required; that work is contracted out.
- Able to read equipment manuals, electrical drawings and piping layouts, and to work with condition monitoring and maintenance records.
- Experience guiding technicians or leading a small maintenance team.
- Experience improving plant energy and water consumption using utility data and simple payback calculations.
- Working knowledge of food plant hygiene requirements (GMP, food-grade lubricants, water treatment) is preferred.
- Interested candidates are invited to complete the application form below and submit their resume to help us better understand their qualifications, technical experience, and career expectations.
- Application Form:
https://forms.clickup.com/90182619220/f/2kzmv42m-6058/MIALAVDHQ4Y8KJ7NL1
Yeo Hiap SengJohor Bahru
Job description
Summarize / Overview of the objective of the role.
As a Maintenance Engineer, you will play a key role to ensure the smooth operation, reliability and efficiency for all production machines, equipment's and facilities in the plant...
Guang Heng Plastic Industries Sdn BhdKulai, 30 km from Johor Bahru
Minimum SPM, Certificate, or Diploma in Electrical, Mechanical, Engineering, or a related field.
• Previous experience in maintenance or technical work is an added advantage.
• Basic knowledge of electrical, mechanical, plumbing, or general...
Private AdvertiserJohor Bahru
Job Responsibilities
1. Responsible for daily operation and maintenance of data center electrical, HVAC and weak current systems, execute routine maintenance plans and handle equipment faults. Provide on-site duty and respond to off-hour...